An Angle Grinder, sometimes called a side or disc grinder is a handheld power tool commonly used for cutting, grinding and polishing.

The use of angle grinders can be extremely dangerous. If incorrectly used, angle grinder discs can shatter causing projectiles to fly violently through the air hitting the operator and others in the work area.

This program includes:

• Types of Angle Grinders
• Pre-Use Checks
• Safe Operation
• Disc Shatter
• Kick Back
• Other Angle Grinder Hazards
• Control Measures

This program is aimed at professional and non-professional operators of Angle Grinders as a safety and operational guide.

RUNNING TIME: 9 Minutes

The use of angle grinders can be extremely dangerous, posing a risk not only to the operator but to others in the work area. This safety short gives you some checks that should be performed before operating an angle grinder.

RUNNING TIME: 1 Minute

An awareness of a chainsaw’s condition is vital in the safe and successful operation of the chainsaw.

This program will concentrate mainly on the gasoline powered type of chainsaw but essentially the safety and operational considerations are very much the same for the various types.

RUNNING TIME: 5 Minutes

There are a variety of timber cutting tasks that can be undertaken using a chainsaw however the ones that this program will cover are:

• Limbing
• Cross-cutting or Bucking
• Ripping
• and Felling

There is no doubt that a chainsaw can be a very dangerous tool and that there is no substitute for proper training and a professional approach to their use.

RUNNING TIME: 5 Minutes

A two-stroke engine runs on a mixture of Gasoline and oil. Check your operator’s manual for correct Gas/oil ratios and oil types.

It is vital to make the mixture according to the recommended ratio as engine damage may occur with the wrong gasoline mixture. Creating this mixture in a controlled environment helps to minimize the risk of contaminants in the mixture.

RUNNING TIME: 3 Minutes

When operating a chainsaw, it is vital that all safety measures relating to the operation of the saw be practiced at all times. Do not use a chainsaw that is back–firing, missing parts or not running properly. It is dangerous and is a potential fire hazard.

Having a strong understanding of the safe operation basics is key to completing any chainsaw operation successfully and safely.

RUNNING TIME: 4 Minutes

A comprehensive knowledge about the components of the chainsaw is vital for keeping the chainsaw in a safe working order, knowing when maintenance will be required and ensuring that the inbuilt safety features are able to be used during operation.

This program covers:

• The Components of the Chainsaw

• The Components of the Chain

• Chain Selection Options

There are a number of different chainsaws available, including gasoline powered, electric and battery-operated chainsaws.

This program will concentrate mainly on the gasoline powered type of chainsaw but essentially the safety and operational considerations are very much the same for the various types.

RUNNING TIME: 10 Minutes

When working with chainsaws, certain safety procedures must be practiced to protect the chainsaw operator and those working in the immediate vicinity from injury.

The most common parts of the body which are injured by chainsaw accidents are the hands, knees, feet and head especially on the left side of the body. However with the application of proper work practices, the use of modern equipment, and correct protective clothing, chainsaws can be used efficiently and safely.

RUNNING TIME: 2 Minutes

Without the right safety procedures, cutting operations with a chainsaw can be extremely dangerous.

There are many cutting safety procedures used to reduce the risk to the chainsaw operator.

This program covers:

• Limbing

• Cross-Cutting

• Ripping

• The Basics of Tree Felling

• Safety Felling Practices

If the saw is properly maintained and used according to safe work practices, safe and accurate cutting will result.

RUNNING TIME: 13 Minutes

Chainsaws are used extensively by a wide range of people in many industries.

The Chainsaw is of great assistance when fast cutting of timber is required, but if the chainsaw is not properly maintained its potential for causing injury cannot be underestimated.

In this program we will show you the features of a modern chainsaw and how to maintain them safely.

This program covers:

• Sharpening the Chain

• Filing Technique

• Guide Bar Maintenance

• Guide Bar Assembly

• Chain Tensioning

• Preparing the Gasoline

RUNNING TIME: 12 Minutes

The chainsaw can be an extremely dangerous tool if not operated correctly.

There are a range of basic preparation and operational procedures that are crucial for safe and successful chainsaw operations.

This program covers:

• Personal Safety

• Preparation

• Fueling the Chainsaw

• Starting the Chainsaw

• Holding and Operating the Chainsaw

RUNNING TIME: 12 Minutes

There are a wide range of saw chains to choose from however the major factors that need to be taken into consideration are the type of work to be undertaken, the type of timber to be cut and the Chain Cutter Profile which is best suited to your purpose.

RUNNING TIME: 3 Minutes

It is always preferable to start the chainsaw on the ground. However, in some situations, it’s not appropriate or practical.

There should be no people or animals in the vicinity of the saw as those without sufficient personal protective equipment, for example, safety glasses or hearing protection, will be exposed to significant potential harm.

RUNNING TIME: 4 Minutes

Circular saws are used extensively for a variety of cutting operations. This safety short gives you a quick overview of how to operate a circular saw.

RUNNING TIME: 1 Minute

Compressed air is not ‘just air’, it is air travelling in an intense stream at a high velocity. Exposure to it can result in severe injuries or even fatality. This safety short gives you a quick overview of the do’s and don’ts when using compressed air.

RUNNING TIME: 2 Minutes

In the control of a skilled person Electrical Power Tools show their flexibility and their speed.

This program shows operators how to get the best out of their Power Tools and how to use them effectively and safely.

The tools covered in this program include:

• Power Drills
• Belt and Orbital Sanders
• Jig and Circular Saws
• Power Planers

Topics discussed in this program include:

• Specific safety procedures when using electrical equipment
• Personal safety, including clothing and breathing apparatus
• How to identify inefficiencies and overloading of equipment
• Understanding the types and applicable uses for drill bits, saw blades, etc
• Step by step instruction in skilled use of all Power Tools in the program

This program is aimed at professional and non-professional operators of Electric Power Tools as a safety and operational guide.

RUNNING TIME: 15 Minutes